Sintering is the core molding process of PTFE raw materials, which realizes the bonding and forming of PTFE powder particles through high-temperature ...
PTFE materials have excellent high-temperature resistance and can work stably in the temperature range of -200°C to 260°C for a long time. However, in...
Creep and stress relaxation are the most typical time-dependent mechanical behaviors of PTFE materials. Under long-term continuous load and constant s...
PTFE has extremely low surface energy and excellent chemical inertness, resulting in poor surface adhesion performance and difficult bonding with othe...
PTFE tubes and sheets are the most widely used two major categories of PTFE industrial products, covering sealing, insulation, anti-corrosion, fluid d...
PTFE has unique crystal phase transition characteristics within conventional heat treatment temperature range, and its internal crystal phase state wi...
Micro-porosity is a common microscopic structural defect in sintered and molded PTFE materials. In the process of PTFE powder pressing, sintering and ...
PTFE film performance is highly dependent on skiving process parameters, and subtle changes in parameter settings will directly affect the thickness u...
Skiving blade geometry is the core factor determining the processing quality and efficiency of PTFE skiving, and blade structural parameters such as e...
High-performance industrial sealing systems put forward ultra-high requirements on material flatness, thickness uniformity, surface finish, and compre...
Although PTFE skiving is defined as a cold processing technology, continuous mechanical peeling and friction between the blade and the material will i...
PTFE’s macroscopic service performance is determined by its internal microscopic molecular structure and crystal state. Traditional molding and cuttin...
Hi! Welcome back.
How are you doing?
We always adheres to the professional, attentive, focused environmental protection filtration, and is a worthy partner in the filtration industry.
Amptfe is a world-class PTFE pipe, rod, and material solution manufacturer certified by ISO 9001:2015.
Tel: +86 1-891-270-6195
E-mail:ptfe@amptfe.com
Add:298-C4-2216 FangCheng Road XingWuQu Wuxi
Copyright © 2024 Ltd All Rights Reserved.
